螺桿啟閉機如何進行使用保養

螺桿式啟閉機使用保養
Use and Maintenance of Screw Hoist
操作人員必須掌握啟閉機的結構、性能與操作方法，并有一定的機械知識，以確保機器的正常運轉。
Operators must master the structure, performance and operation method of the hoist, and have some mechanical knowledge to ensure the normal operation of the machine.
操作前，對啟閉機進行全面檢查，各部位潤滑情況是否良好，螺栓有無松動。電動啟閉時檢查電源線路是否接通，開關是否良好。
Before operation, the hoist is inspected thoroughly. Whether the lubrication condition of each part is tuogun.07858.net biaozhi.37ix.com.cn huafenchi.07858.net baoding.89ix.com fanghulan.37ix.com.cn www.zhisudai.com good or not and whether the bolt is loosened. Check whether the power supply line is connected and the switch is good when the electric power is on or off.
電動運轉時，操作人員不得離開現場，發現問題立即停機。
Operators are not allowed to leave the site when electric power is running, and stop immediately when problems are found.
啟閉機維修時，必須清除載荷。
When the hoist is repaired, the load must be cleared.
在使用時，需隨時由注油孔注入潤滑油，要經常保持足夠的潤滑油，螺桿要定期清除油垢，涂護新油，以防銹蝕。
When in use, it is necessary to inject lubricating oil into the injection hole at any time, to keep enough lubricating oil, screw should regularly remove grease scale and coat new oil to prevent rust.